• ENGT 3130: Electrical Safety Standards

  1.00 Credits

  Utah Valley University

  
  Prerequisite(s): MATH 1050 and University Advanced Standing. Emphasizes industrial safety and focuses heavily on electrical safety in the workplace as stated in NFPA 70E and other relevant standards. Includes practices and topics to help mitigate workplace injuries. Discusses when it is appropriate to work on live systems and focuses on the latest NFPA 70E consensus standard. Introduces arc flash hazards, analysis and mitigation strategies.
  ShareENGT 3130 - Electrical Safety Standards

• ENGT 3150: Power System Analysis and Design

  3.00 Credits

  Utah Valley University

  
  Prerequisite(s): ENGT 3100 and University Advanced Standing. Reviews electrical one-line diagrams, per unit system, and electrical models for transformers, synchronous generators, induction machines, power lines, and other pertinent apparatus. Discusses analysis techniques utilizing both equivalent circuits and Y-bus methods. Introduces unbalanced fault analysis, symmetrical components, and sequence networks for single-line to ground, phase-phase, and phase-phase-ground faults. Focuses on design concepts and codes related to medium and low voltage power systems.
  ShareENGT 3150 - Power System Analysis and Design

• ENGT 3160: Power Quality and Reliability

  3.00 Credits

  Utah Valley University

  
  Prerequisite(s): ENGT 3100, ENGT 3010, and University Advanced Standing. Pre- or Corequisite(s): ENGT 3020. Introduces concepts of power quality measurement and the reliability measures used in the electric power industry. Teaches power quality measures such as VSSI, crest factor, flicker, harmonics and THD. Discusses these PQ measures, common causes of poor PQ and possible mitigation strategies. Emphasizes the concepts and mathematical basis for common power system reliability indices and measures such as SAIDI, CAIDI, MAIFI, and SAIFI. Introduces common strategies for improving power system reliability measures. Discusses power quality problems on distribution systems, application standards, and proper grounding techniques.
  ShareENGT 3160 - Power Quality and Reliability

• ENGT 3220: Motion Control for Engineering Technologist

  3.00 Credits

  Utah Valley University

  
  Prerequisite(s): (AET 2270, AET 2275) OR (MECH 2550, MECH 2555) and University Advanced Standing. Corequisite(s): ENGT 3225. Examines design and integration of servo systems in automated systems. Applies mathematical principles to design concepts. Analyzes PID tuning and feedback control. Investigates servo motors for single axis control, multi-axis control, and coordinated motion control. Corequisite:    ENGT 3225
  ShareENGT 3220 - Motion Control for Engineering Technologist

• ENGT 3225: Motion Control for Engineering Technologist Lab

  1.00 Credits

  Utah Valley University

  
  Prerequisite(s): (AET 2270, AET 2275) OR (MECH 2550, MECH 2555) and University Advanced Standing. Corequisite(s): ENGT 3220. Analyzes servo motors in automated systems. Applies servo motors to automated systems including wiring and programming. Explores PID tuning. Examines internal and external feedback loops. Apply servo motors to single axis control, multi-axis control, and coordinated motion control. Corequisite:    ENGT 3220
  ShareENGT 3225 - Motion Control for Engineering Technologist Lab

• ENGT 3250: Automated Safety Systems

  2.00 Credits

  Utah Valley University

  
  Prerequisite(s): AET 2270, AET 2275 and University Advanced Standing. Corequisite(s): ENGT 3255. Explores safety systems in industrial automation including instrumented safety systems, risk assessment, and design. Focuses on a life-cycle approach to automation engineering safety design. Incorporates safety standards such as ISO 13849, ISA 84, IEC 61508 and IEC 61511. Examines safety controllers, peripheral equipment, and relevant technology. Corequisite:    ENGT 3255
  ShareENGT 3250 - Automated Safety Systems

• ENGT 3255: Automated Safety Systems Lab

  1.00 Credits

  Utah Valley University

  
  Prerequisite(s): AET 2270, AET 2275, and University Advanced Standing. Corequisite(s): ENGT 3250. Applies safety systems and technology in a lab environment. Discusses wiring of safety relays and other hardwired safety devices. Explores interface wiring and programming of safety programmable relays. Teaches wiring of safety I/O and programming a safety PLC including safety instructions. Focuses of troubleshooting safety systems. Corequisite:    ENGT 3250
  ShareENGT 3255 - Automated Safety Systems Lab

• ENGT 3600: Capstone I Design WE

  3.00 Credits

  Utah Valley University

  
  Prerequisite(s): ENGT 3020 and University Advanced Standing.. Integrates previous course work to design senior capstone project. Analyzes electrical AC/DC/Servo/Stepper motors, pneumatics, hydraulics for application in capstone project. Develops automated systems layouts of mechanical, actuators, electrical box, safety, and wiring diagrams. Applies project based proposal writing and approval process. Requires selection and documentation of components needed to complete project.
  ShareENGT 3600 - Capstone I Design WE

• ENGT 4100: Power System Protection and Automation

  3.00 Credits

  Utah Valley University

  
  Prerequisite(s): ENGT 3100 and University Advanced Standing. Pre- or Corequisite(s): ENGT 3150, ENGT 4105. Reviews phasors and polarity, symmetrical components, sequence networks, and the per unit system. Introduces general protection philosophies, definitions, and ANSI device numbers. Discusses relay input devices, instrument transformers, and accuracy classes. Focuses on introductory concepts related to power system protection fundamentals including protecting, lines, feeders, buses, transformers, motors, and generators. Introduces standardized protection methods and emphasizes system grounding methods and principles. Teaches trip circuits and automation principles in multi-function microprocessor based relays. Emphasizes troubleshooting and testing of protection elements.
  ShareENGT 4100 - Power System Protection and Automation

• ENGT 4105: Power System Protection and Automation Lab

  1.00 Credits

  Utah Valley University

  
  Prerequisite(s): ENGT 3100 and University Advanced Standing. Corequisite(s): ENGT 4100. Applies phasors, symmetrical components, sequence networks, and relaying theory to electrical mechanical and microprocessor based protective relays in a lab setting. Configures, programs, tests, and troubleshoots various types of protective relays, protective elements, and field circuits. Utilizes a current and voltage industry test set. Emphasizes relay settings, testing, and troubleshooting protection elements. Introduces revenue metering, industrial automation controllers, and communications. Corequisite:    ENGT 4100
  ShareENGT 4105 - Power System Protection and Automation Lab